By detecting the suction cup or the end of the manipulator and balancing the gas pressure in the cylinder, it can automatically identify the load on the mechanical arm, and automatically adjust the air pressure in the cylinder through the pneumatic logic control circuit, to achieve the purpose of automatic balance.When it’s working, heavy objects are like being suspended in the air, which can avoid the collision of product docking.Within the working range of the mechanical arm, the operator can easily move it back, left and down to any position, and the person itself can easily operate.At the same time, the pneumatic circuit also has chain protection functions such as preventing accidental object loss and pressure loss protection
The working principle and mode of the suspension power manipulator:
By detecting the suction cup or the end of the manipulator and balancing the gas pressure in the cylinder, it can automatically identify the load on the mechanical arm, and automatically adjust the air pressure in the cylinder through the pneumatic logic control circuit, to achieve the purpose of automatic balance.When working, heavy objects are like being suspended in the air, which can avoid the collision of product docking.Within the working range of the mechanical arm, the operator can easily move it back, left and down to any position, and the person itself can easily operate.At the same time, the pneumatic circuit also has chain protection functions such as preventing accidental object loss and pressure loss protection
Max payload. 900 Kg
Max Action radius: 4500 mm
Vertical Travel: 0,5m/min
Control system: 2200 mm
Control system: air fully pneumatic
Supply: compressed air (40 µm)，no contain grease
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: +0° a +45° C
Noise: air consumption: 100 Nl ÷ 400 N per cycle
Rotation: Column shaft and fixture shaft 360° continuous rotation,middle shaft 300° continuous rotation